Swing Hardware Mounts

Ceiling Swing Hook

• Easily screw this strong durable ceiling hook from the beam or stud of your ceiling
• Ideal for therapy swings

Details:

• Includes plate and four screws
• Plate: 4.3"L x 2"W x 1.6"H.
  Screws: 3.3"L x 0.5" Diameter
• Weighs 1 lb.
• Supports up to 300 lbs.
• Made of stainless steel
• Surface wash. Air dry.
• Color: Silver

*Use with adult supervision. For single point suspension use with swivel. Maintain a minimum clearance of 6 feet around the perimeter of the swing. Floor mats should be used to protect users from falls.

Ceiling Beam Swing Suspension Kit

• Perfect for tire swings and single-point suspension equipment, our kit allows you to suspend swings from an exposed wooden beam in your home.
• Ceiling suspension for single-point therapy swings (or use two kits for double-point suspension)

Tools Required:

• Drill
  • 1/2” drill bit
  • 5/16” drill bit
  • 2 1/2” wrenches (one to hold still, one to turn)
  • 2 5/16” wrenches (one to hold still, one to turn)
  • Pencil

Details:

• 8 5/16” flat washers
• 4 5/16” locking nuts
• 4 5/16” hex head bolts
• 4 5/16” lock washers
• 3 1/2” non-locking nut
• 2 1/2” flat washers
• 1 1/2” locking nut
• 1 steel wedge
• 1 1/2” x 6” forged eyebolt
• 1 bracket
• Bracket: 9"L x 4"W x 3/16"D
• Weighs 7 lbs.
• Supports up to 500 lbs.
• Made of steel, forged steel and zinc coated steel
• Surface wash. Air dry.
• Colors: Black and silver

*Adult use only. Professional installation required. For single point suspension use with swivel. Maintain a minimum clearance of 6 feet around the perimeter of the swing. Floor mats recommended.

Steel Eye-Bolt Ceiling Suspension Kit

• Designed for frequent institutional use, the Steel Eye-Bolt Set is all you need to suspend a single or double point suspension from any steel I or H beam. For 2-point suspension swings, purchase two kits. 
• Steel beam suspension for single-point and double-point therapy swings
• Steel beam suspension for single-point and double-point therapy swings

Details:

• 1 1/2" x 4" (1.3cm x 10cm) galvanized forged steel eye bolt
• 1 1/2" (1.3cm) washer
• 1 1/2" (1.3cm) positive lock nut

This type of eye bolt is recommended for straight line pull only. All the following wear points should be checked monthly and recorded on the checklist enclosed. Check eye-bolt for loose nuts or movement. Tighten if necessary. Check eye-bolt for wear at the point where it rubs against the safety snap. If wear exists, it should not exceed 30% of the diameter of the eye bolt. If it does, discontinue use immediately and replace the eye-bolt.

* Adult use only. Professional installation recommended.