Titan Disinfectant Sprayers

Product Description

A disinfectant sprayer option for any size building or application. This high production one-gun sprayers that are portable and powerful sprayers from .47 GPM to .60 GPM.

SPRAY DISINFECTANT & PROTECT HIGH PRODUCTION DISINFECTANT APPLICATION

Titan airless sprayers are proven to maximize productivity when spraying disinfectants on commercial applications.

Airless sprayers provide high production rates to complete disinfectant jobs faster and with better coverage.
Titan has the right sprayer for the job with flow rates from 0.47 GPM to 1.25 GPM.
Delivers maximum ROI with high production rates, inexpensive equipment and ease of maintenance.
Proven to spray select EPA “List N” solutions for use against the novel coronavirus which causes COVID-19.

HEA™ SPRAY TECHNOLOGY

High Efficiency Airless™ spray technology delivers the industry best wetting with a large fan pattern with bigger droplets set anywhere from 500–1200 PSI.

Proven Results

Lab tested and proven for spraying disinfectant materials
Remediation contractors have relied on Titan sprayers for decades

Lower Pressure. High Production

Optimizes spray application putting material where it belongs
The right mix of high production with the right droplet size
Delivers a consistent wetted surface without over-saturation

Agile Application

Spray gun is easy to maneuver for hard to reach areas
Versatility to extend hose lengths up to 300'
Built in ergonomics keep you spraying longer with more comfort

WHAT TYPES OF DISINFECTANT CAN BE SPRAYED?

Alcohol Based

Ethanol
Isopropanol

Water Based

Aldehyde
Phenolic
Quaternary Ammonium Compounds
Sodium Hypochlorite (Bleach)
Peroxyacetic Acid
Hydrogen Peroxide

Specifications

Technical

Impact 410 Sprayers – Skid & High Rider

Includes: RX-80 Gun, TR 517 Tip & 50’ Hose

GPM \| LPM	0.47 GPM \| 1.78 LPM
MAX OPERATING PRESSURE	3100 PSI \| 21.37 MPa
MAX TIP SIZE - 1 GUN - ELECTRIC	0.021"
MOTOR	3/4 HP DCX
RECOMMENDED GALLONS PER WEEK	50-75
ITEMS INCLUDED	RX-80 Gun, TR¹ 517 Tip, 1/4" x 50' Airless Hose

Storage/Care Instructions

Follow the manufacturer’s safety recommendations for wearing proper PPE.
Thoroughly read the operating manual of the sprayer before using.
Review and follow the recommendations contained in the manufacturer’s material and product safety data sheets.
The sprayer should always be located outside the area that you are spraying at all times.
When using any materials that contain Bleach, Hydrogen Peroxide, Quaternary Ammonia, Sodium Hypochlorite, Ethanol, or Hypochlorous Acid, the units should be flushed immediately after each use. Most of these materials are highly corrosive and should never be left in the pumps longer than 15 minutes after spraying.
Check the filters in the gun and sprayer daily after each use and clean or replace as necessary.
Do not spray any electrical devices and equipment.

Assembly Required

No

Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account

Documents

Documents	Download Spec Sheet

Care Instructions

Storage/Care Instructions	Follow the manufacturer’s safety recommendations for wearing proper PPE. Thoroughly read the operating manual of the sprayer before using. Review and follow the recommendations contained in the manufacturer’s material and product safety data sheets. The sprayer should always be located outside the area that you are spraying at all times. When using any materials that contain Bleach, Hydrogen Peroxide, Quaternary Ammonia, Sodium Hypochlorite, Ethanol, or Hypochlorous Acid, the units should be flushed immediately after each use. Most of these materials are highly corrosive and should never be left in the pumps longer than 15 minutes after spraying. Check the filters in the gun and sprayer daily after each use and clean or replace as necessary. Do not spray any electrical devices and equipment.

Storage/Care Instructions

Follow the manufacturer’s safety recommendations for wearing proper PPE.
Thoroughly read the operating manual of the sprayer before using.
Review and follow the recommendations contained in the manufacturer’s material and product safety data sheets.
The sprayer should always be located outside the area that you are spraying at all times.
When using any materials that contain Bleach, Hydrogen Peroxide, Quaternary Ammonia, Sodium Hypochlorite, Ethanol, or Hypochlorous Acid, the units should be flushed immediately after each use. Most of these materials are highly corrosive and should never be left in the pumps longer than 15 minutes after spraying.
Check the filters in the gun and sprayer daily after each use and clean or replace as necessary.
Do not spray any electrical devices and equipment.

Warnings

Choking Hazard	No
Sterile	No

Suggestions

Titan Disinfectant Sprayers

Company

Support

Helpful Links